PTFE Sheets Manufacturer in Pune

PTFE Sheets Manufacturer, Supplier & Exporter in Pune, Maharashtra

National Fluoromers manufactures PTFE Sheets at its own plant in MIDC Miraj and supplies them to process plants, OEMs and fabricators in Pune, Maharashtra. We make moulded, skived, chemically etched and dimpled sheets in virgin PTFE and filled grades.

Buyers in and around Chakan, Bhosari, Talegaon, Ranjangaon and Kurkumbh MIDC use our sheets for gaskets, tank linings, slide pads, electrical insulation and bridge bearings. Our Miraj plant is about 230 km from Pune by road, so orders usually reach Pune within 1 to 2 days of dispatch.

  • ~230 kmfrom our Miraj plant
  • 1 to 2 daysroad delivery after dispatch
  • Since 2007PTFE manufacturing

PTFE Sheets range we supply in Pune

Compression-moulded and sintered sheets up to 100 mm thick and 1200 × 1200 mm. Dense and dimensionally stable, so they suit heavy-duty gaskets, insulators, wear pads and structural supports.

Thin, flexible sheets skived from a sintered billet, from 0.1 mm up to 3 mm thick and up to 1200 mm wide, in rolls or cut lengths. Used for electrical insulation, diaphragms, linings and thin gaskets.

Sheets etched on one or both sides (0.5 mm to 100 mm) so they can be bonded to steel, rubber or composites. The right choice for lined tanks, bonded bearing pads and laminated seals.

Precision-moulded dimpled sheets, 3 mm to 8 mm thick, made to IRC 83 for POT-PTFE and sliding bridge bearings. The dimples hold silicone grease and keep friction at about 0.04 to 0.06.

Sheets slit into strips and films for guide strips, wear strips, insulation tapes and sealing in tight spaces. Available plain, etched or bronze and carbon filled.

Sheets in glass, carbon, graphite, bronze and MoS₂ filled grades where you need better wear resistance, lower creep or higher load capacity than virgin PTFE gives.

technical specifications

PropertyValue
MaterialVirgin PTFE / all filled grades
Moulded sheet thicknessUp to 100 mm
Moulded sheet sizeUp to 1200 mm × 1200 mm
Skived sheet thickness0.1 mm to 3 mm
Skived sheet widthUp to 1200 mm, rolls or cut lengths
Etched sheetOne side / both sides, 0.5 mm to 100 mm
Dimple sheet3 mm to 8 mm, as per IRC 83
Density2.1 to 2.2 g/cm³
Working temperature-200°C to +260°C
SizesStandard and non-standard, cut to size

PTFE Sheets for industries in Pune

Pune is one of India's largest engineering and automotive centres, with dense supplier clusters in Chakan, Bhosari and Talegaon, chemical units in Kurkumbh and Ranjangaon, and a growing pharma base. Each of these sectors uses PTFE in a different form.

  • Automotive and auto components: We supply slide pads, thrust washers and shims in fixtures and assembly lines to plants in Chakan, Bhosari and Pimpri Chinchwad.
  • Chemicals and specialty chemicals: Buyers in Kurkumbh MIDC and Ranjangaon source flange gaskets and bonded linings in tanks, columns and scrubbers from us.
  • Pharma and biotech: We supply FDA-grade gaskets and liners in reactors, dryers and filter housings to plants in Pune.
  • Engineering, machine tools and hydraulics: We supply slideway linings, wear plates and low-friction guides to plants in Bhosari and Talegaon.
  • Electrical and electronics: Customers in Pune rely on us for insulation layers in transformers, switchgear and panels.
  • Bridges and infrastructure: We supply POT-PTFE bearing sheets on bridges, flyovers and metro viaducts to plants in the Pune metro, ring road and flyovers.

applications of PTFE Sheets

  • Gaskets and seals: Ready-cut and fabricated gaskets for chemical pipelines, flanges, reactors and pumps.
  • Tank and duct linings: Etched sheets bonded inside tanks, chutes and ducts that handle acids and solvents.
  • Sliding and wear pads: Slide pads, shims, wear strips and machine slideway linings where low friction matters.
  • Electrical insulation: Skived sheets as insulation layers in transformers, switchgear and cable wrapping.
  • Bridge and structural bearings: Dimpled and plain sheets for POT-PTFE bearings, sliding plates and expansion joints.
  • Food and pharma equipment: Virgin, non-toxic sheets for gaskets, liners and release surfaces in contact parts.

why buyers in Pune choose National Fluoromers

  • Own manufacturing since 2007: Moulding, sintering and CNC machining happen at our plant in MIDC Miraj, so you buy direct from the maker, not a trader.
  • Virgin and filled grades: Virgin PTFE plus glass, carbon, graphite, bronze and MoS₂ filled grades for the same product.
  • Custom sizes: Standard and non-standard sizes, cut-to-size pieces and machined parts made to your drawing.
  • Close to Pune: Our plant is in the same state, so you get short transit times, easy factory visits and quick replacement orders.
  • Quality checks: Every batch is checked for dimensions, density and surface finish before dispatch.

FAQs: PTFE Sheets in Pune

Yes. We manufacture PTFE sheets at our plant in MIDC Miraj, Maharashtra and supply them to customers in Pune, Maharashtra. Our Miraj plant is about 230 km from Pune by road, so orders usually reach Pune within 1 to 2 days of dispatch.
Moulded sheets are made up to 100 mm thick and 1200 × 1200 mm. Skived sheets run from 0.1 mm to 3 mm thick and up to 1200 mm wide. Etched sheets are available from 0.5 mm to 100 mm. We also cut sheets to your exact size.
Use moulded sheets for thick gaskets, pads and machined parts. Use skived sheets for thin insulation, diaphragms and linings. Use chemically etched sheets when the PTFE must be bonded to metal or rubber. Use dimpled sheets for bridge bearings. Our team can recommend a grade if you share the medium, temperature and load.
Yes. Apart from virgin PTFE we make sheets in glass, carbon, graphite, bronze and MoS₂ filled grades for better wear resistance and load capacity.
Send the type of sheet, grade, thickness, size and quantity through our enquiry form, call +91-7620544880 or email sales@nationalptfe.net. We reply with price and delivery time.
Yes. Our plant is at Plot No. C-54/1/B, MIDC Miraj, Sangli, Maharashtra. Please call +91-7620544880 to fix a visit.
Need PTFE Sheets in Pune? Send your size and grade for a quick quote.

Call +91-7620544880 or email sales@nationalptfe.net

Send Enquiry
whatsapp