PTFE Sheets Manufacturer, Supplier & Exporter in Mumbai, Maharashtra
National Fluoromers manufactures PTFE Sheets at its own plant in MIDC Miraj and supplies them to process plants, OEMs and fabricators in Mumbai, Maharashtra. We make moulded, skived, chemically etched and dimpled sheets in virgin PTFE and filled grades.
Buyers in and around Andheri, Vikhroli, Bhandup, Chembur and Mahul use our sheets for gaskets, tank linings, slide pads, electrical insulation and bridge bearings. Being in the same state, we dispatch to Mumbai by road from our Miraj plant with short transit times.
- Same stateshort road transit from Miraj
- Directfrom the manufacturer
- Since 2007PTFE manufacturing
PTFE Sheets range we supply in Mumbai
Compression-moulded and sintered sheets up to 100 mm thick and 1200 × 1200 mm. Dense and dimensionally stable, so they suit heavy-duty gaskets, insulators, wear pads and structural supports.
Thin, flexible sheets skived from a sintered billet, from 0.1 mm up to 3 mm thick and up to 1200 mm wide, in rolls or cut lengths. Used for electrical insulation, diaphragms, linings and thin gaskets.
Sheets etched on one or both sides (0.5 mm to 100 mm) so they can be bonded to steel, rubber or composites. The right choice for lined tanks, bonded bearing pads and laminated seals.
Precision-moulded dimpled sheets, 3 mm to 8 mm thick, made to IRC 83 for POT-PTFE and sliding bridge bearings. The dimples hold silicone grease and keep friction at about 0.04 to 0.06.
Sheets slit into strips and films for guide strips, wear strips, insulation tapes and sealing in tight spaces. Available plain, etched or bronze and carbon filled.
Sheets in glass, carbon, graphite, bronze and MoS₂ filled grades where you need better wear resistance, lower creep or higher load capacity than virgin PTFE gives.
technical specifications
| Property | Value |
|---|---|
| Material | Virgin PTFE / all filled grades |
| Moulded sheet thickness | Up to 100 mm |
| Moulded sheet size | Up to 1200 mm × 1200 mm |
| Skived sheet thickness | 0.1 mm to 3 mm |
| Skived sheet width | Up to 1200 mm, rolls or cut lengths |
| Etched sheet | One side / both sides, 0.5 mm to 100 mm |
| Dimple sheet | 3 mm to 8 mm, as per IRC 83 |
| Density | 2.1 to 2.2 g/cm³ |
| Working temperature | -200°C to +260°C |
| Sizes | Standard and non-standard, cut to size |
PTFE Sheets for industries in Mumbai
Mumbai is India's commercial capital. Many chemical, pharma and engineering companies run head offices and purchase teams here, and the city has refineries at Mahul and Trombay, busy ports and large metro, coastal road and bridge projects.
- Chemicals and specialty chemicals: Buyers in Chembur and Trombay source flange gaskets and bonded linings in tanks, columns and scrubbers from us.
- Pharma and biotech: We supply FDA-grade gaskets and liners in reactors, dryers and filter housings to plants in Andheri and Vikhroli.
- Oil, gas and petrochemicals: We supply gaskets, slide plates under pipe racks and corrosion-proof linings to plants in Mahul and Trombay.
- Ports, shipbuilding and marine: We supply seawater-resistant gaskets and slide pads for cranes and ship structures to plants in Mumbai Port and nearby shipyards.
- Bridges and infrastructure: We supply POT-PTFE bearing sheets on bridges, flyovers and metro viaducts to plants in metro lines, the coastal road and sea bridges.
- Food, dairy and beverages: Customers in Mumbai rely on us for non-stick liners, release surfaces and food-contact gaskets.
applications of PTFE Sheets
- Gaskets and seals: Ready-cut and fabricated gaskets for chemical pipelines, flanges, reactors and pumps.
- Tank and duct linings: Etched sheets bonded inside tanks, chutes and ducts that handle acids and solvents.
- Sliding and wear pads: Slide pads, shims, wear strips and machine slideway linings where low friction matters.
- Electrical insulation: Skived sheets as insulation layers in transformers, switchgear and cable wrapping.
- Bridge and structural bearings: Dimpled and plain sheets for POT-PTFE bearings, sliding plates and expansion joints.
- Food and pharma equipment: Virgin, non-toxic sheets for gaskets, liners and release surfaces in contact parts.
why buyers in Mumbai choose National Fluoromers
- Own manufacturing since 2007: Moulding, sintering and CNC machining happen at our plant in MIDC Miraj, so you buy direct from the maker, not a trader.
- Virgin and filled grades: Virgin PTFE plus glass, carbon, graphite, bronze and MoS₂ filled grades for the same product.
- Custom sizes: Standard and non-standard sizes, cut-to-size pieces and machined parts made to your drawing.
- Close to Mumbai: Our plant is in Maharashtra, so you get short transit times, easy factory visits and quick replacement orders.
- Quality checks: Every batch is checked for dimensions, density and surface finish before dispatch.
FAQs: PTFE Sheets in Mumbai
Call +91-7620544880 or email sales@nationalptfe.net
Send Enquiry
