High-strength PTFE molded bushes – manufactured & exported by National Fluoromers
| Property | Value |
|---|---|
| Material | Virgin or filled ptfe |
| Outer diameter (OD) | Up to 600 mm (custom on request) |
| Inner diameter (ID) | As per design |
| Length | 25 mm to 300 mm |
| Temperature resistance | –200°C to +260°C |
| Chemical resistance | Excellent |
| Surface finish | Smooth (can be machined further) |
| Tolerance | ±0.1 mm or per drawing |
Whether you're working in chemical processing, insulation, or machinery, our PTFE molded bushes are built to endure extreme conditions without deformation, degradation, or frequent replacement.
A PTFE molded bush is a hollow cylindrical component made from virgin or filled PTFEresin through a compression molding process. Unlike extruded or machined counterparts, molded bushes are ideal for applications requiring larger diameters, thicker walls, and structural stability. They are particularly suited for static and semi-dynamic environments with exposure to aggressive chemicals, pressure, and thermal cycling.
- Uniform wall thickness: Excellent concentricity and smooth surface finish
- High load capacity: Withstands compression and static mechanical stress
- Chemically inert: Resistant to almost all chemicals, acids, and solvents
- Non-stick surface: Reduces wear and friction under sliding conditions
- Broad temperature range: Performs from –200°C to +260°C
- Moisture & UV resistant: Ideal for outdoor and wet environments
- Long-lasting under corrosive and abrasive conditions
- Maintenance-free operation with no lubrication needed
- Easy to install, machine, or cut to size
- Suitable for electrical insulation applications
- Available in filled grades for enhanced mechanical properties
- Shaft and spindle liners: In pumps and mixers
- Valve guides and sleeves: In chemical plants
- Shaft insulation and wear rings: In high-voltage equipment
- Pipe and flange isolation systems
- Insulating sleeves: In food and pharmaceutical machinery
- Chemical & petrochemical
- Food & beverage
- Electrical & electronics
- Pharmaceutical & biotech
- Automotive & hydraulic systems
- Marine & offshore engineering
- Advanced compression molding and finishing capabilities
- Custom OD, ID, and length available on request
- Availability of virgin and reinforced PTFEgrades (glass, bronze, carbon)
- Quick dispatch and export-friendly packaging
- Expert guidance for material and design selection
- Bushes with custom tolerances for CNC applications
- Filled PTFEbushes for high-load or abrasive environments
- Pre-machined or as-molded formats
- Low and high-volume production runs supported
Let us help you choose the perfect PTFEbush for your system.
Contact Us