PTFE Blocks & Discs Manufacturer in Pune

PTFE Blocks & Discs Manufacturer, Supplier & Exporter in Pune, Maharashtra

National Fluoromers manufactures PTFE Blocks, PTFE Solid Circles and PTFE Discs for machine shops and equipment makers in Pune, Maharashtra. These thick moulded shapes give you material for large machined parts with little waste.

Fabricators around Chakan, Bhosari, Talegaon, Ranjangaon and Kurkumbh MIDC use them for valve bodies, slide pads, bearing pads and large gaskets. Our Miraj plant is about 230 km from Pune by road, so orders usually reach Pune within 1 to 2 days of dispatch.

  • ~230 kmfrom our Miraj plant
  • 1 to 2 daysroad delivery after dispatch
  • Since 2007PTFE manufacturing

PTFE Blocks & Discs range we supply in Pune

Moulded blocks 10 mm to 100 mm thick and up to 1000 × 1000 mm, cut to size. Used for machined parts, wear pads and spacers.

Circular moulded sheets from 50 mm to 600 mm diameter and 1 mm to 50 mm thick, with a smooth or etched surface.

Discs from 5 mm to 600 mm diameter and 1 mm to 25 mm thick, for valve seats, bearing pads and seals.

Blocks and discs in glass, carbon, graphite and bronze filled grades for heavier loads and less creep.

technical specifications

PropertyValue
MaterialVirgin or filled PTFE
Block thickness10 mm to 100 mm
Block sizeUp to 1000 mm × 1000 mm, cut to size
Circle diameter50 mm to 600 mm
Circle thickness1 mm to 50 mm
Disc diameter5 mm to 600 mm
Disc thickness1 mm to 25 mm
Working temperature-200°C to +260°C

PTFE Blocks & Discs for industries in Pune

Pune is one of India's largest engineering and automotive centres, with dense supplier clusters in Chakan, Bhosari and Talegaon, chemical units in Kurkumbh and Ranjangaon, and a growing pharma base. Each of these sectors uses PTFE in a different form.

  • Automotive and auto components: Customers in Chakan, Bhosari and Pimpri Chinchwad rely on us for fixture pads and machined parts.
  • Chemicals and specialty chemicals: We supply valve bodies, pump parts and spargers in acid service to plants in Kurkumbh MIDC and Ranjangaon.
  • Pharma and biotech: Customers in Pune rely on us for machined contact parts on process equipment.
  • Engineering, machine tools and hydraulics: Customers in Bhosari and Talegaon rely on us for large machined parts, wear pads and spacers.
  • Electrical and electronics: Buyers in Pune source insulating blocks and spacers from us.
  • Bridges and infrastructure: Customers in the Pune metro, ring road and flyovers rely on us for bearing pads and sliding discs for bridges.

applications of PTFE Blocks & Discs

  • Large machined parts: Valve bodies, pump housings and manifolds in corrosive service.
  • Bearing and slide pads: Pads for bridges, structures and heavy equipment.
  • Valve seats: Discs machined into seats for ball, butterfly and diaphragm valves.
  • Electrical insulation: Insulating blocks and spacers in high-voltage equipment.
  • Large gaskets: Circles cut into gaskets for big flanges and manholes.
  • Chemical equipment: Spargers, distributors and parts for acid-handling plants.

why buyers in Pune choose National Fluoromers

  • Own manufacturing since 2007: Moulding, sintering and CNC machining happen at our plant in MIDC Miraj, so you buy direct from the maker, not a trader.
  • Virgin and filled grades: Virgin PTFE plus glass, carbon, graphite, bronze and MoS₂ filled grades for the same product.
  • Custom sizes: Standard and non-standard sizes, cut-to-size pieces and machined parts made to your drawing.
  • Close to Pune: Our plant is in the same state, so you get short transit times, easy factory visits and quick replacement orders.
  • Quality checks: Every batch is checked for dimensions, density and surface finish before dispatch.

FAQs: PTFE Blocks & Discs in Pune

Yes. We mould PTFE blocks, solid circles and discs at MIDC Miraj and supply customers in Pune, Maharashtra. Our Miraj plant is about 230 km from Pune by road, so orders usually reach Pune within 1 to 2 days of dispatch.
Blocks are made 10 mm to 100 mm thick and up to 1000 × 1000 mm. We can cut them to the size you need.
Discs run from 5 mm to 600 mm diameter and 1 mm to 25 mm thick. Solid circles run from 50 mm to 600 mm diameter and 1 mm to 50 mm thick.
Yes. Blocks, circles and discs are available in glass, carbon, graphite and bronze filled grades.
Send the grade, size and quantity through our enquiry form or call +91-7620544880.
Yes. Our plant is at Plot No. C-54/1/B, MIDC Miraj, Sangli, Maharashtra. Please call +91-7620544880 to fix a visit.
Need PTFE Blocks & Discs in Pune? Send your size and grade for a quick quote.

Call +91-7620544880 or email sales@nationalptfe.net

Send Enquiry
whatsapp