PTFE Bushes & Tubes Manufacturer, Supplier & Exporter in Pune, Maharashtra
National Fluoromers manufactures PTFE Bushes, PTFE Tubes and PTFE Bushings for OEMs, pump and valve makers and maintenance teams in Pune, Maharashtra. We mould hollow bushes and cylinders, then machine them to size on CNC lathes.
Plants around Chakan, Bhosari, Talegaon, Ranjangaon and Kurkumbh MIDC use our bushes as dry-running bearings, liners and sleeves. Our Miraj plant is about 230 km from Pune by road, so orders usually reach Pune within 1 to 2 days of dispatch.
- ~230 kmfrom our Miraj plant
- 1 to 2 daysroad delivery after dispatch
- Since 2007PTFE manufacturing
PTFE Bushes & Tubes range we supply in Pune
Moulded hollow bushes up to 1000 mm diameter, in virgin and all filled grades, held to ±0.1 mm or as per drawing.
CNC-turned bushes up to 300 mm long with tolerances down to ±0.1 mm, made from your drawing or sample.
Moulded envelope bushes 25 mm to 300 mm long, used as corrosion-proof sleeves and liners.
Bushes in glass, carbon, bronze or polymer filled PTFE, with higher compressive strength than virgin PTFE.
Thick-wall PTFE tubes and sleeves for linings, insulation and chemical transfer.
Bronze filled bushings (up to 40 to 60% bronze) for high loads and better heat dissipation in hydraulics.
technical specifications
| Property | Value |
|---|---|
| Material | Virgin PTFE / glass, carbon, bronze filled |
| Moulded bush diameter | Up to 1000 mm |
| Machined bush length | Up to 300 mm (or custom) |
| Envelope bush length | 25 mm to 300 mm |
| Tolerance | Down to ±0.1 mm |
| Machining | CNC turning, milling, drilling |
| Working temperature | -200°C to +260°C |
| Range | Standard and non-standard, to drawing |
PTFE Bushes & Tubes for industries in Pune
Pune is one of India's largest engineering and automotive centres, with dense supplier clusters in Chakan, Bhosari and Talegaon, chemical units in Kurkumbh and Ranjangaon, and a growing pharma base. Each of these sectors uses PTFE in a different form.
- Automotive and auto components: Buyers in Chakan, Bhosari and Pimpri Chinchwad source dry-running bushes in fixtures, conveyors and assembly lines from us.
- Chemicals and specialty chemicals: Customers in Kurkumbh MIDC and Ranjangaon rely on us for pump sleeves and valve bushes that resist acids and solvents.
- Pharma and biotech: Buyers in Pune source clean bushes on mixers, fillers and packing machines from us.
- Engineering, machine tools and hydraulics: Buyers in Bhosari and Talegaon source guide bushes in hydraulic cylinders, presses and machines from us.
- Electrical and electronics: We supply insulating sleeves and spacers to plants in Pune.
- Bridges and infrastructure: Buyers in the Pune metro, ring road and flyovers source guide bushes in bearings and gates from us.
applications of PTFE Bushes & Tubes
- Dry-running bearings: Self-lubricating bushes where oil or grease is not allowed.
- Pump and valve sleeves: Shaft sleeves and stem bushes in chemical pumps and valves.
- Hydraulic equipment: Guide bushes and bearings in cylinders and presses.
- Linings: Tube liners for pipes, nozzles and fittings in corrosive service.
- Electrical insulation: Insulating sleeves and spacers.
- Food and pharma machines: Clean, non-stick bushes on conveyors, mixers and fillers.
why buyers in Pune choose National Fluoromers
- Own manufacturing since 2007: Moulding, sintering and CNC machining happen at our plant in MIDC Miraj, so you buy direct from the maker, not a trader.
- Virgin and filled grades: Virgin PTFE plus glass, carbon, graphite, bronze and MoS₂ filled grades for the same product.
- Custom sizes: Standard and non-standard sizes, cut-to-size pieces and machined parts made to your drawing.
- Close to Pune: Our plant is in the same state, so you get short transit times, easy factory visits and quick replacement orders.
- Quality checks: Every batch is checked for dimensions, density and surface finish before dispatch.
FAQs: PTFE Bushes & Tubes in Pune
Call +91-7620544880 or email sales@nationalptfe.net
Send Enquiry
