PTFE Sheets Manufacturer, Supplier & Exporter in Pimpri Chinchwad, Maharashtra
National Fluoromers manufactures PTFE Sheets at its own plant in MIDC Miraj and supplies them to process plants, OEMs and fabricators in Pimpri Chinchwad, Maharashtra. We make moulded, skived, chemically etched and dimpled sheets in virgin PTFE and filled grades.
Buyers in and around Bhosari MIDC, Pimpri, Chinchwad, Akurdi and Talawade use our sheets for gaskets, tank linings, slide pads, electrical insulation and bridge bearings. Being in the same state, we dispatch to Pimpri Chinchwad by road from our Miraj plant with short transit times.
- Same stateshort road transit from Miraj
- Directfrom the manufacturer
- Since 2007PTFE manufacturing
PTFE Sheets range we supply in Pimpri Chinchwad
Compression-moulded and sintered sheets up to 100 mm thick and 1200 × 1200 mm. Dense and dimensionally stable, so they suit heavy-duty gaskets, insulators, wear pads and structural supports.
Thin, flexible sheets skived from a sintered billet, from 0.1 mm up to 3 mm thick and up to 1200 mm wide, in rolls or cut lengths. Used for electrical insulation, diaphragms, linings and thin gaskets.
Sheets etched on one or both sides (0.5 mm to 100 mm) so they can be bonded to steel, rubber or composites. The right choice for lined tanks, bonded bearing pads and laminated seals.
Precision-moulded dimpled sheets, 3 mm to 8 mm thick, made to IRC 83 for POT-PTFE and sliding bridge bearings. The dimples hold silicone grease and keep friction at about 0.04 to 0.06.
Sheets slit into strips and films for guide strips, wear strips, insulation tapes and sealing in tight spaces. Available plain, etched or bronze and carbon filled.
Sheets in glass, carbon, graphite, bronze and MoS₂ filled grades where you need better wear resistance, lower creep or higher load capacity than virgin PTFE gives.
technical specifications
| Property | Value |
|---|---|
| Material | Virgin PTFE / all filled grades |
| Moulded sheet thickness | Up to 100 mm |
| Moulded sheet size | Up to 1200 mm × 1200 mm |
| Skived sheet thickness | 0.1 mm to 3 mm |
| Skived sheet width | Up to 1200 mm, rolls or cut lengths |
| Etched sheet | One side / both sides, 0.5 mm to 100 mm |
| Dimple sheet | 3 mm to 8 mm, as per IRC 83 |
| Density | 2.1 to 2.2 g/cm³ |
| Working temperature | -200°C to +260°C |
| Sizes | Standard and non-standard, cut to size |
PTFE Sheets for industries in Pimpri Chinchwad
Pimpri Chinchwad grew around large automobile plants and is now packed with auto component, press shop and hydraulic equipment makers in Bhosari MIDC and Talawade.
- Automotive and auto components: Buyers in Pimpri, Chinchwad and Akurdi source slide pads, thrust washers and shims in fixtures and assembly lines from us.
- Engineering, machine tools and hydraulics: Buyers in Bhosari MIDC and Talawade source slideway linings, wear plates and low-friction guides from us.
- Electrical and electronics: We supply insulation layers in transformers, switchgear and panels to plants in Bhosari.
- Bridges and infrastructure: Buyers in Pimpri Chinchwad source POT-PTFE bearing sheets on bridges, flyovers and metro viaducts from us.
- Food, dairy and beverages: We supply non-stick liners, release surfaces and food-contact gaskets to plants in the PCMC area.
applications of PTFE Sheets
- Gaskets and seals: Ready-cut and fabricated gaskets for chemical pipelines, flanges, reactors and pumps.
- Tank and duct linings: Etched sheets bonded inside tanks, chutes and ducts that handle acids and solvents.
- Sliding and wear pads: Slide pads, shims, wear strips and machine slideway linings where low friction matters.
- Electrical insulation: Skived sheets as insulation layers in transformers, switchgear and cable wrapping.
- Bridge and structural bearings: Dimpled and plain sheets for POT-PTFE bearings, sliding plates and expansion joints.
- Food and pharma equipment: Virgin, non-toxic sheets for gaskets, liners and release surfaces in contact parts.
why buyers in Pimpri Chinchwad choose National Fluoromers
- Own manufacturing since 2007: Moulding, sintering and CNC machining happen at our plant in MIDC Miraj, so you buy direct from the maker, not a trader.
- Virgin and filled grades: Virgin PTFE plus glass, carbon, graphite, bronze and MoS₂ filled grades for the same product.
- Custom sizes: Standard and non-standard sizes, cut-to-size pieces and machined parts made to your drawing.
- Close to Pimpri Chinchwad: Our plant is in Maharashtra, so you get short transit times, easy factory visits and quick replacement orders.
- Quality checks: Every batch is checked for dimensions, density and surface finish before dispatch.
FAQs: PTFE Sheets in Pimpri Chinchwad
Call +91-7620544880 or email sales@nationalptfe.net
Send Enquiry
