PTFE Bushes & Tubes Manufacturer in Nashik

PTFE Bushes & Tubes Manufacturer, Supplier & Exporter in Nashik, Maharashtra

National Fluoromers manufactures PTFE Bushes, PTFE Tubes and PTFE Bushings for OEMs, pump and valve makers and maintenance teams in Nashik, Maharashtra. We mould hollow bushes and cylinders, then machine them to size on CNC lathes.

Plants around Satpur MIDC, Ambad MIDC, Sinnar MIDC, Ozar and Igatpuri use our bushes as dry-running bearings, liners and sleeves. Being in the same state, we dispatch to Nashik by road from our Miraj plant with short transit times.

  • Same stateshort road transit from Miraj
  • Directfrom the manufacturer
  • Since 2007PTFE manufacturing

PTFE Bushes & Tubes range we supply in Nashik

Moulded hollow bushes up to 1000 mm diameter, in virgin and all filled grades, held to ±0.1 mm or as per drawing.

CNC-turned bushes up to 300 mm long with tolerances down to ±0.1 mm, made from your drawing or sample.

Moulded envelope bushes 25 mm to 300 mm long, used as corrosion-proof sleeves and liners.

Bushes in glass, carbon, bronze or polymer filled PTFE, with higher compressive strength than virgin PTFE.

Thick-wall PTFE tubes and sleeves for linings, insulation and chemical transfer.

Bronze filled bushings (up to 40 to 60% bronze) for high loads and better heat dissipation in hydraulics.

technical specifications

PropertyValue
MaterialVirgin PTFE / glass, carbon, bronze filled
Moulded bush diameterUp to 1000 mm
Machined bush lengthUp to 300 mm (or custom)
Envelope bush length25 mm to 300 mm
ToleranceDown to ±0.1 mm
MachiningCNC turning, milling, drilling
Working temperature-200°C to +260°C
RangeStandard and non-standard, to drawing

PTFE Bushes & Tubes for industries in Nashik

Nashik has strong automotive, electrical and engineering clusters in Satpur, Ambad and Sinnar MIDC, an aircraft plant at Ozar, and a large wine and food processing industry.

  • Automotive and auto components: Buyers in Satpur and Ambad MIDC source dry-running bushes in fixtures, conveyors and assembly lines from us.
  • Electrical and electronics: We supply insulating sleeves and spacers to plants in Satpur and Ambad.
  • Engineering, machine tools and hydraulics: Buyers in Sinnar MIDC source guide bushes in hydraulic cylinders, presses and machines from us.
  • Aerospace and defence: Buyers in Ozar source precision bushes in aerospace assemblies from us.
  • Food, dairy and beverages: We supply non-stick bushes that need no lubrication near food to plants in Nashik and Dindori.

applications of PTFE Bushes & Tubes

  • Dry-running bearings: Self-lubricating bushes where oil or grease is not allowed.
  • Pump and valve sleeves: Shaft sleeves and stem bushes in chemical pumps and valves.
  • Hydraulic equipment: Guide bushes and bearings in cylinders and presses.
  • Linings: Tube liners for pipes, nozzles and fittings in corrosive service.
  • Electrical insulation: Insulating sleeves and spacers.
  • Food and pharma machines: Clean, non-stick bushes on conveyors, mixers and fillers.

why buyers in Nashik choose National Fluoromers

  • Own manufacturing since 2007: Moulding, sintering and CNC machining happen at our plant in MIDC Miraj, so you buy direct from the maker, not a trader.
  • Virgin and filled grades: Virgin PTFE plus glass, carbon, graphite, bronze and MoS₂ filled grades for the same product.
  • Custom sizes: Standard and non-standard sizes, cut-to-size pieces and machined parts made to your drawing.
  • Close to Nashik: Our plant is in Maharashtra, so you get short transit times, easy factory visits and quick replacement orders.
  • Quality checks: Every batch is checked for dimensions, density and surface finish before dispatch.

FAQs: PTFE Bushes & Tubes in Nashik

Yes. We make PTFE bushes, tubes and bushings at MIDC Miraj and supply customers in Nashik, Maharashtra. Being in the same state, we dispatch to Nashik by road from our Miraj plant with short transit times.
Yes. We CNC machine bushes to your drawing or sample, with tolerances down to ±0.1 mm and lengths up to 300 mm or more on request.
Moulded bushes and cylinders can be made up to 1000 mm diameter.
Bronze filled or carbon filled PTFE usually works best. These grades resist creep and wear much better than virgin PTFE while keeping friction low.
Share the drawing or OD, ID, length, grade and quantity through our enquiry form or call +91-7620544880.
Yes. Our plant is at Plot No. C-54/1/B, MIDC Miraj, Sangli, Maharashtra. Please call +91-7620544880 to fix a visit.
Need PTFE Bushes & Tubes in Nashik? Send your size and grade for a quick quote.

Call +91-7620544880 or email sales@nationalptfe.net

Send Enquiry
whatsapp