PTFE Bushes & Tubes Manufacturer in Thane

PTFE Bushes & Tubes Manufacturer, Supplier & Exporter in Thane, Maharashtra

National Fluoromers manufactures PTFE Bushes, PTFE Tubes and PTFE Bushings for OEMs, pump and valve makers and maintenance teams in Thane, Maharashtra. We mould hollow bushes and cylinders, then machine them to size on CNC lathes.

Plants around Wagle Estate, Kolshet, Dombivli MIDC, Ambernath and Bhiwandi use our bushes as dry-running bearings, liners and sleeves. Being in the same state, we dispatch to Thane by road from our Miraj plant with short transit times.

  • Same stateshort road transit from Miraj
  • Directfrom the manufacturer
  • Since 2007PTFE manufacturing

PTFE Bushes & Tubes range we supply in Thane

Moulded hollow bushes up to 1000 mm diameter, in virgin and all filled grades, held to ±0.1 mm or as per drawing.

CNC-turned bushes up to 300 mm long with tolerances down to ±0.1 mm, made from your drawing or sample.

Moulded envelope bushes 25 mm to 300 mm long, used as corrosion-proof sleeves and liners.

Bushes in glass, carbon, bronze or polymer filled PTFE, with higher compressive strength than virgin PTFE.

Thick-wall PTFE tubes and sleeves for linings, insulation and chemical transfer.

Bronze filled bushings (up to 40 to 60% bronze) for high loads and better heat dissipation in hydraulics.

technical specifications

PropertyValue
MaterialVirgin PTFE / glass, carbon, bronze filled
Moulded bush diameterUp to 1000 mm
Machined bush lengthUp to 300 mm (or custom)
Envelope bush length25 mm to 300 mm
ToleranceDown to ±0.1 mm
MachiningCNC turning, milling, drilling
Working temperature-200°C to +260°C
RangeStandard and non-standard, to drawing

PTFE Bushes & Tubes for industries in Thane

Thane district has one of Maharashtra's densest chemical belts in Dombivli and Ambernath MIDC, an engineering base in Wagle Estate and a big textile and warehousing hub in Bhiwandi.

  • Chemicals and specialty chemicals: Buyers in Dombivli and Ambernath MIDC source pump sleeves and valve bushes that resist acids and solvents from us.
  • Pharma and biotech: We supply clean bushes on mixers, fillers and packing machines to plants in Thane and Ambernath.
  • Engineering, machine tools and hydraulics: We supply guide bushes in hydraulic cylinders, presses and machines to plants in Wagle Estate.
  • Textiles and dyeing: Buyers in Bhiwandi source bushes and sleeves on spinning and weaving machines from us.
  • Electrical and electronics: Customers in Thane rely on us for insulating sleeves and spacers.
  • Food, dairy and beverages: Customers in Thane district rely on us for non-stick bushes that need no lubrication near food.

applications of PTFE Bushes & Tubes

  • Dry-running bearings: Self-lubricating bushes where oil or grease is not allowed.
  • Pump and valve sleeves: Shaft sleeves and stem bushes in chemical pumps and valves.
  • Hydraulic equipment: Guide bushes and bearings in cylinders and presses.
  • Linings: Tube liners for pipes, nozzles and fittings in corrosive service.
  • Electrical insulation: Insulating sleeves and spacers.
  • Food and pharma machines: Clean, non-stick bushes on conveyors, mixers and fillers.

why buyers in Thane choose National Fluoromers

  • Own manufacturing since 2007: Moulding, sintering and CNC machining happen at our plant in MIDC Miraj, so you buy direct from the maker, not a trader.
  • Virgin and filled grades: Virgin PTFE plus glass, carbon, graphite, bronze and MoS₂ filled grades for the same product.
  • Custom sizes: Standard and non-standard sizes, cut-to-size pieces and machined parts made to your drawing.
  • Close to Thane: Our plant is in Maharashtra, so you get short transit times, easy factory visits and quick replacement orders.
  • Quality checks: Every batch is checked for dimensions, density and surface finish before dispatch.

FAQs: PTFE Bushes & Tubes in Thane

Yes. We make PTFE bushes, tubes and bushings at MIDC Miraj and supply customers in Thane, Maharashtra. Being in the same state, we dispatch to Thane by road from our Miraj plant with short transit times.
Yes. We CNC machine bushes to your drawing or sample, with tolerances down to ±0.1 mm and lengths up to 300 mm or more on request.
Moulded bushes and cylinders can be made up to 1000 mm diameter.
Bronze filled or carbon filled PTFE usually works best. These grades resist creep and wear much better than virgin PTFE while keeping friction low.
Share the drawing or OD, ID, length, grade and quantity through our enquiry form or call +91-7620544880.
Yes. Our plant is at Plot No. C-54/1/B, MIDC Miraj, Sangli, Maharashtra. Please call +91-7620544880 to fix a visit.
Need PTFE Bushes & Tubes in Thane? Send your size and grade for a quick quote.

Call +91-7620544880 or email sales@nationalptfe.net

Send Enquiry
whatsapp