PTFE Sheets Manufacturer, Supplier & Exporter in Sangli-Miraj, Maharashtra
National Fluoromers manufactures PTFE Sheets at its own plant in MIDC Miraj and supplies them to process plants, OEMs and fabricators in Sangli-Miraj, Maharashtra. We make moulded, skived, chemically etched and dimpled sheets in virgin PTFE and filled grades.
Buyers in and around MIDC Miraj, Kupwad MIDC, Sangli, Wanlesswadi and Tasgaon use our sheets for gaskets, tank linings, slide pads, electrical insulation and bridge bearings. Our plant is in MIDC Miraj itself, so you can collect material from the factory or get local delivery.
- Localfactory in MIDC Miraj
- Pickupor local delivery
- Since 2007PTFE manufacturing
PTFE Sheets range we supply in Sangli-Miraj
Compression-moulded and sintered sheets up to 100 mm thick and 1200 × 1200 mm. Dense and dimensionally stable, so they suit heavy-duty gaskets, insulators, wear pads and structural supports.
Thin, flexible sheets skived from a sintered billet, from 0.1 mm up to 3 mm thick and up to 1200 mm wide, in rolls or cut lengths. Used for electrical insulation, diaphragms, linings and thin gaskets.
Sheets etched on one or both sides (0.5 mm to 100 mm) so they can be bonded to steel, rubber or composites. The right choice for lined tanks, bonded bearing pads and laminated seals.
Precision-moulded dimpled sheets, 3 mm to 8 mm thick, made to IRC 83 for POT-PTFE and sliding bridge bearings. The dimples hold silicone grease and keep friction at about 0.04 to 0.06.
Sheets slit into strips and films for guide strips, wear strips, insulation tapes and sealing in tight spaces. Available plain, etched or bronze and carbon filled.
Sheets in glass, carbon, graphite, bronze and MoS₂ filled grades where you need better wear resistance, lower creep or higher load capacity than virgin PTFE gives.
technical specifications
| Property | Value |
|---|---|
| Material | Virgin PTFE / all filled grades |
| Moulded sheet thickness | Up to 100 mm |
| Moulded sheet size | Up to 1200 mm × 1200 mm |
| Skived sheet thickness | 0.1 mm to 3 mm |
| Skived sheet width | Up to 1200 mm, rolls or cut lengths |
| Etched sheet | One side / both sides, 0.5 mm to 100 mm |
| Dimple sheet | 3 mm to 8 mm, as per IRC 83 |
| Density | 2.1 to 2.2 g/cm³ |
| Working temperature | -200°C to +260°C |
| Sizes | Standard and non-standard, cut to size |
PTFE Sheets for industries in Sangli-Miraj
Sangli-Miraj is our home base. Our plant is in MIDC Miraj, close to Kupwad MIDC's engineering units, the district's sugar factories and turmeric, raisin and food processing units.
- Engineering, machine tools and hydraulics: We supply slideway linings, wear plates and low-friction guides to plants in Kupwad and Miraj MIDC.
- Sugar and distilleries: We supply gaskets and liners in evaporators, molasses tanks and distillery pipelines to plants in Sangli district.
- Food, dairy and beverages: Customers in Sangli and Tasgaon rely on us for non-stick liners, release surfaces and food-contact gaskets.
- Automotive and auto components: We supply slide pads, thrust washers and shims in fixtures and assembly lines to plants in Kupwad MIDC.
- Chemicals and specialty chemicals: Buyers in Sangli source flange gaskets and bonded linings in tanks, columns and scrubbers from us.
applications of PTFE Sheets
- Gaskets and seals: Ready-cut and fabricated gaskets for chemical pipelines, flanges, reactors and pumps.
- Tank and duct linings: Etched sheets bonded inside tanks, chutes and ducts that handle acids and solvents.
- Sliding and wear pads: Slide pads, shims, wear strips and machine slideway linings where low friction matters.
- Electrical insulation: Skived sheets as insulation layers in transformers, switchgear and cable wrapping.
- Bridge and structural bearings: Dimpled and plain sheets for POT-PTFE bearings, sliding plates and expansion joints.
- Food and pharma equipment: Virgin, non-toxic sheets for gaskets, liners and release surfaces in contact parts.
why buyers in Sangli-Miraj choose National Fluoromers
- Own manufacturing since 2007: Moulding, sintering and CNC machining happen at our plant in MIDC Miraj, so you buy direct from the maker, not a trader.
- Virgin and filled grades: Virgin PTFE plus glass, carbon, graphite, bronze and MoS₂ filled grades for the same product.
- Custom sizes: Standard and non-standard sizes, cut-to-size pieces and machined parts made to your drawing.
- Right in Sangli-Miraj: You can visit the plant, check material in person and get urgent parts quickly.
- Quality checks: Every batch is checked for dimensions, density and surface finish before dispatch.
FAQs: PTFE Sheets in Sangli-Miraj
Call +91-7620544880 or email sales@nationalptfe.net
Send Enquiry
