PTFE Sheets Manufacturer in Kolhapur

PTFE Sheets Manufacturer, Supplier & Exporter in Kolhapur, Maharashtra

National Fluoromers manufactures PTFE Sheets at its own plant in MIDC Miraj and supplies them to process plants, OEMs and fabricators in Kolhapur, Maharashtra. We make moulded, skived, chemically etched and dimpled sheets in virgin PTFE and filled grades.

Buyers in and around Shiroli MIDC, Gokul Shirgaon MIDC, Kagal, Ichalkaranji and Hatkanangale use our sheets for gaskets, tank linings, slide pads, electrical insulation and bridge bearings. Being in the same state, we dispatch to Kolhapur by road from our Miraj plant with short transit times.

  • Same stateshort road transit from Miraj
  • Directfrom the manufacturer
  • Since 2007PTFE manufacturing

PTFE Sheets range we supply in Kolhapur

Compression-moulded and sintered sheets up to 100 mm thick and 1200 × 1200 mm. Dense and dimensionally stable, so they suit heavy-duty gaskets, insulators, wear pads and structural supports.

Thin, flexible sheets skived from a sintered billet, from 0.1 mm up to 3 mm thick and up to 1200 mm wide, in rolls or cut lengths. Used for electrical insulation, diaphragms, linings and thin gaskets.

Sheets etched on one or both sides (0.5 mm to 100 mm) so they can be bonded to steel, rubber or composites. The right choice for lined tanks, bonded bearing pads and laminated seals.

Precision-moulded dimpled sheets, 3 mm to 8 mm thick, made to IRC 83 for POT-PTFE and sliding bridge bearings. The dimples hold silicone grease and keep friction at about 0.04 to 0.06.

Sheets slit into strips and films for guide strips, wear strips, insulation tapes and sealing in tight spaces. Available plain, etched or bronze and carbon filled.

Sheets in glass, carbon, graphite, bronze and MoS₂ filled grades where you need better wear resistance, lower creep or higher load capacity than virgin PTFE gives.

technical specifications

PropertyValue
MaterialVirgin PTFE / all filled grades
Moulded sheet thicknessUp to 100 mm
Moulded sheet sizeUp to 1200 mm × 1200 mm
Skived sheet thickness0.1 mm to 3 mm
Skived sheet widthUp to 1200 mm, rolls or cut lengths
Etched sheetOne side / both sides, 0.5 mm to 100 mm
Dimple sheet3 mm to 8 mm, as per IRC 83
Density2.1 to 2.2 g/cm³
Working temperature-200°C to +260°C
SizesStandard and non-standard, cut to size

PTFE Sheets for industries in Kolhapur

Kolhapur is close to our plant and is known for foundries, auto components and pumps in Shiroli and Gokul Shirgaon MIDC, sugar factories across the district, dairy and the Ichalkaranji textile cluster.

  • Engineering, machine tools and hydraulics: Customers in Shiroli and Gokul Shirgaon MIDC rely on us for slideway linings, wear plates and low-friction guides.
  • Automotive and auto components: Customers in Kagal and Shiroli rely on us for slide pads, thrust washers and shims in fixtures and assembly lines.
  • Sugar and distilleries: Customers in Kolhapur district rely on us for gaskets and liners in evaporators, molasses tanks and distillery pipelines.
  • Textiles and dyeing: We supply non-stick plates, guides and gaskets in dyeing and finishing machines to plants in Ichalkaranji.
  • Food, dairy and beverages: Buyers in Kolhapur district source non-stick liners, release surfaces and food-contact gaskets from us.

applications of PTFE Sheets

  • Gaskets and seals: Ready-cut and fabricated gaskets for chemical pipelines, flanges, reactors and pumps.
  • Tank and duct linings: Etched sheets bonded inside tanks, chutes and ducts that handle acids and solvents.
  • Sliding and wear pads: Slide pads, shims, wear strips and machine slideway linings where low friction matters.
  • Electrical insulation: Skived sheets as insulation layers in transformers, switchgear and cable wrapping.
  • Bridge and structural bearings: Dimpled and plain sheets for POT-PTFE bearings, sliding plates and expansion joints.
  • Food and pharma equipment: Virgin, non-toxic sheets for gaskets, liners and release surfaces in contact parts.

why buyers in Kolhapur choose National Fluoromers

  • Own manufacturing since 2007: Moulding, sintering and CNC machining happen at our plant in MIDC Miraj, so you buy direct from the maker, not a trader.
  • Virgin and filled grades: Virgin PTFE plus glass, carbon, graphite, bronze and MoS₂ filled grades for the same product.
  • Custom sizes: Standard and non-standard sizes, cut-to-size pieces and machined parts made to your drawing.
  • Close to Kolhapur: Our plant is in Maharashtra, so you get short transit times, easy factory visits and quick replacement orders.
  • Quality checks: Every batch is checked for dimensions, density and surface finish before dispatch.

FAQs: PTFE Sheets in Kolhapur

Yes. We manufacture PTFE sheets at our plant in MIDC Miraj, Maharashtra and supply them to customers in Kolhapur, Maharashtra. Being in the same state, we dispatch to Kolhapur by road from our Miraj plant with short transit times.
Moulded sheets are made up to 100 mm thick and 1200 × 1200 mm. Skived sheets run from 0.1 mm to 3 mm thick and up to 1200 mm wide. Etched sheets are available from 0.5 mm to 100 mm. We also cut sheets to your exact size.
Use moulded sheets for thick gaskets, pads and machined parts. Use skived sheets for thin insulation, diaphragms and linings. Use chemically etched sheets when the PTFE must be bonded to metal or rubber. Use dimpled sheets for bridge bearings. Our team can recommend a grade if you share the medium, temperature and load.
Yes. Apart from virgin PTFE we make sheets in glass, carbon, graphite, bronze and MoS₂ filled grades for better wear resistance and load capacity.
Send the type of sheet, grade, thickness, size and quantity through our enquiry form, call +91-7620544880 or email sales@nationalptfe.net. We reply with price and delivery time.
Yes. Our plant is at Plot No. C-54/1/B, MIDC Miraj, Sangli, Maharashtra. Please call +91-7620544880 to fix a visit.
Need PTFE Sheets in Kolhapur? Send your size and grade for a quick quote.

Call +91-7620544880 or email sales@nationalptfe.net

Send Enquiry
whatsapp