PTFE Bushes & Tubes Exporter in Poland

PTFE Bushes & Tubes Manufacturer, Supplier & Exporter for Poland

National Fluoromers manufactures PTFE Bushes, PTFE Tubes and PTFE Bushings for OEMs, pump and valve makers and maintenance teams in Poland. We mould hollow bushes and cylinders, then machine them to size on CNC lathes.

Plants around Warsaw, Płock, Katowice, Gdańsk and Puławy use our bushes as dry-running bearings, liners and sleeves. We export to Poland by sea freight from Nhava Sheva (JNPT) and by air cargo for urgent orders, with export packing and shipping documents.

  • Exportsea and air freight
  • FOB / CIFquotes on request
  • Since 2007PTFE manufacturing

PTFE Bushes & Tubes range we supply in Poland

Moulded hollow bushes up to 1000 mm diameter, in virgin and all filled grades, held to ±0.1 mm or as per drawing.

CNC-turned bushes up to 300 mm long with tolerances down to ±0.1 mm, made from your drawing or sample.

Moulded envelope bushes 25 mm to 300 mm long, used as corrosion-proof sleeves and liners.

Bushes in glass, carbon, bronze or polymer filled PTFE, with higher compressive strength than virgin PTFE.

Thick-wall PTFE tubes and sleeves for linings, insulation and chemical transfer.

Bronze filled bushings (up to 40 to 60% bronze) for high loads and better heat dissipation in hydraulics.

technical specifications

PropertyValue
MaterialVirgin PTFE / glass, carbon, bronze filled
Moulded bush diameterUp to 1000 mm
Machined bush lengthUp to 300 mm (or custom)
Envelope bush length25 mm to 300 mm
ToleranceDown to ±0.1 mm
MachiningCNC turning, milling, drilling
Working temperature-200°C to +260°C
RangeStandard and non-standard, to drawing

PTFE Bushes & Tubes for industries in Poland

Poland has a large refinery at Płock, fertiliser and chemical plants in Puławy, mining and steel in Silesia, car and appliance plants, and shipyards in Gdańsk.

  • Oil, gas and petrochemicals: Buyers in Płock source valve stem bushes and pump sleeves from us.
  • Fertilisers: We supply pump sleeves in acid and ammonia service to plants in Puławy.
  • Mining and minerals: Buyers in Silesia source bushes in dusty equipment where grease attracts dirt from us.
  • Steel and metal processing: We supply bushes in pickling and coating lines to plants in Katowice.
  • Automotive and auto components: Buyers in Poland source dry-running bushes in fixtures, conveyors and assembly lines from us.
  • Ports, shipbuilding and marine: Buyers in Gdańsk source seawater-resistant bushes on deck machinery from us.

applications of PTFE Bushes & Tubes

  • Dry-running bearings: Self-lubricating bushes where oil or grease is not allowed.
  • Pump and valve sleeves: Shaft sleeves and stem bushes in chemical pumps and valves.
  • Hydraulic equipment: Guide bushes and bearings in cylinders and presses.
  • Linings: Tube liners for pipes, nozzles and fittings in corrosive service.
  • Electrical insulation: Insulating sleeves and spacers.
  • Food and pharma machines: Clean, non-stick bushes on conveyors, mixers and fillers.

why buyers in Poland choose National Fluoromers

  • Own manufacturing since 2007: Moulding, sintering and CNC machining happen at our plant in MIDC Miraj, so you buy direct from the maker, not a trader.
  • Virgin and filled grades: Virgin PTFE plus glass, carbon, graphite, bronze and MoS₂ filled grades for the same product.
  • Custom sizes: Standard and non-standard sizes, cut-to-size pieces and machined parts made to your drawing.
  • Export-ready: We pack for sea and air freight, prepare the shipping documents and quote FOB or CIF as you prefer.
  • Quality checks: Every batch is checked for dimensions, density and surface finish before dispatch.

FAQs: PTFE Bushes & Tubes in Poland

Yes. We make PTFE bushes, tubes and bushings at MIDC Miraj and supply customers in Poland. We export to Poland by sea freight from Nhava Sheva (JNPT) and by air cargo for urgent orders, with export packing and shipping documents.
Yes. We CNC machine bushes to your drawing or sample, with tolerances down to ±0.1 mm and lengths up to 300 mm or more on request.
Moulded bushes and cylinders can be made up to 1000 mm diameter.
Bronze filled or carbon filled PTFE usually works best. These grades resist creep and wear much better than virgin PTFE while keeping friction low.
Share the drawing or OD, ID, length, grade and quantity through our enquiry form or call +91-7620544880.
Send the product, grade, sizes, quantity and your delivery port or city in Poland. We quote FOB Nhava Sheva or CIF to your port and share the expected transit time.
Need PTFE Bushes & Tubes in Poland? Send your size and grade for a quick quote.

Call +91-7620544880 or email sales@nationalptfe.net

Send Enquiry
whatsapp