PTFE Bushes & Tubes Exporter in United Kingdom

PTFE Bushes & Tubes Manufacturer, Supplier & Exporter for United Kingdom

National Fluoromers manufactures PTFE Bushes, PTFE Tubes and PTFE Bushings for OEMs, pump and valve makers and maintenance teams in United Kingdom. We mould hollow bushes and cylinders, then machine them to size on CNC lathes.

Plants around Teesside, Grangemouth, Manchester, Birmingham and Aberdeen use our bushes as dry-running bearings, liners and sleeves. We export to United Kingdom by sea freight from Nhava Sheva (JNPT) and by air cargo for urgent orders, with export packing and shipping documents.

  • Exportsea and air freight
  • FOB / CIFquotes on request
  • Since 2007PTFE manufacturing

PTFE Bushes & Tubes range we supply in United Kingdom

Moulded hollow bushes up to 1000 mm diameter, in virgin and all filled grades, held to ±0.1 mm or as per drawing.

CNC-turned bushes up to 300 mm long with tolerances down to ±0.1 mm, made from your drawing or sample.

Moulded envelope bushes 25 mm to 300 mm long, used as corrosion-proof sleeves and liners.

Bushes in glass, carbon, bronze or polymer filled PTFE, with higher compressive strength than virgin PTFE.

Thick-wall PTFE tubes and sleeves for linings, insulation and chemical transfer.

Bronze filled bushings (up to 40 to 60% bronze) for high loads and better heat dissipation in hydraulics.

technical specifications

PropertyValue
MaterialVirgin PTFE / glass, carbon, bronze filled
Moulded bush diameterUp to 1000 mm
Machined bush lengthUp to 300 mm (or custom)
Envelope bush length25 mm to 300 mm
ToleranceDown to ±0.1 mm
MachiningCNC turning, milling, drilling
Working temperature-200°C to +260°C
RangeStandard and non-standard, to drawing

PTFE Bushes & Tubes for industries in United Kingdom

The United Kingdom has chemical clusters in Teesside and Grangemouth, North Sea oil and gas services in Aberdeen, pharma, aerospace and defence, and car plants in the Midlands.

  • Chemicals and specialty chemicals: Customers in Teesside and Grangemouth rely on us for pump sleeves and valve bushes that resist acids and solvents.
  • Oil, gas and petrochemicals: Buyers in Aberdeen source valve stem bushes and pump sleeves from us.
  • Pharma and biotech: Buyers in the UK source clean bushes on mixers, fillers and packing machines from us.
  • Aerospace and defence: Buyers in the UK source precision bushes in aerospace assemblies from us.
  • Automotive and auto components: Buyers in the Midlands source dry-running bushes in fixtures, conveyors and assembly lines from us.
  • Water and effluent treatment: We supply bushes in dosing pumps and valves to plants in the UK.

applications of PTFE Bushes & Tubes

  • Dry-running bearings: Self-lubricating bushes where oil or grease is not allowed.
  • Pump and valve sleeves: Shaft sleeves and stem bushes in chemical pumps and valves.
  • Hydraulic equipment: Guide bushes and bearings in cylinders and presses.
  • Linings: Tube liners for pipes, nozzles and fittings in corrosive service.
  • Electrical insulation: Insulating sleeves and spacers.
  • Food and pharma machines: Clean, non-stick bushes on conveyors, mixers and fillers.

why buyers in United Kingdom choose National Fluoromers

  • Own manufacturing since 2007: Moulding, sintering and CNC machining happen at our plant in MIDC Miraj, so you buy direct from the maker, not a trader.
  • Virgin and filled grades: Virgin PTFE plus glass, carbon, graphite, bronze and MoS₂ filled grades for the same product.
  • Custom sizes: Standard and non-standard sizes, cut-to-size pieces and machined parts made to your drawing.
  • Export-ready: We pack for sea and air freight, prepare the shipping documents and quote FOB or CIF as you prefer.
  • Quality checks: Every batch is checked for dimensions, density and surface finish before dispatch.

FAQs: PTFE Bushes & Tubes in United Kingdom

Yes. We make PTFE bushes, tubes and bushings at MIDC Miraj and supply customers in United Kingdom. We export to United Kingdom by sea freight from Nhava Sheva (JNPT) and by air cargo for urgent orders, with export packing and shipping documents.
Yes. We CNC machine bushes to your drawing or sample, with tolerances down to ±0.1 mm and lengths up to 300 mm or more on request.
Moulded bushes and cylinders can be made up to 1000 mm diameter.
Bronze filled or carbon filled PTFE usually works best. These grades resist creep and wear much better than virgin PTFE while keeping friction low.
Share the drawing or OD, ID, length, grade and quantity through our enquiry form or call +91-7620544880.
Send the product, grade, sizes, quantity and your delivery port or city in United Kingdom. We quote FOB Nhava Sheva or CIF to your port and share the expected transit time.
Need PTFE Bushes & Tubes in United Kingdom? Send your size and grade for a quick quote.

Call +91-7620544880 or email sales@nationalptfe.net

Send Enquiry
whatsapp