PTFE Sheets Exporter in Poland

PTFE Sheets Manufacturer, Supplier & Exporter for Poland

National Fluoromers manufactures PTFE Sheets at its own plant in MIDC Miraj and supplies them to process plants, OEMs and fabricators in Poland. We make moulded, skived, chemically etched and dimpled sheets in virgin PTFE and filled grades.

Buyers in and around Warsaw, Płock, Katowice, Gdańsk and Puławy use our sheets for gaskets, tank linings, slide pads, electrical insulation and bridge bearings. We export to Poland by sea freight from Nhava Sheva (JNPT) and by air cargo for urgent orders, with export packing and shipping documents.

  • Exportsea and air freight
  • FOB / CIFquotes on request
  • Since 2007PTFE manufacturing

PTFE Sheets range we supply in Poland

Compression-moulded and sintered sheets up to 100 mm thick and 1200 × 1200 mm. Dense and dimensionally stable, so they suit heavy-duty gaskets, insulators, wear pads and structural supports.

Thin, flexible sheets skived from a sintered billet, from 0.1 mm up to 3 mm thick and up to 1200 mm wide, in rolls or cut lengths. Used for electrical insulation, diaphragms, linings and thin gaskets.

Sheets etched on one or both sides (0.5 mm to 100 mm) so they can be bonded to steel, rubber or composites. The right choice for lined tanks, bonded bearing pads and laminated seals.

Precision-moulded dimpled sheets, 3 mm to 8 mm thick, made to IRC 83 for POT-PTFE and sliding bridge bearings. The dimples hold silicone grease and keep friction at about 0.04 to 0.06.

Sheets slit into strips and films for guide strips, wear strips, insulation tapes and sealing in tight spaces. Available plain, etched or bronze and carbon filled.

Sheets in glass, carbon, graphite, bronze and MoS₂ filled grades where you need better wear resistance, lower creep or higher load capacity than virgin PTFE gives.

technical specifications

PropertyValue
MaterialVirgin PTFE / all filled grades
Moulded sheet thicknessUp to 100 mm
Moulded sheet sizeUp to 1200 mm × 1200 mm
Skived sheet thickness0.1 mm to 3 mm
Skived sheet widthUp to 1200 mm, rolls or cut lengths
Etched sheetOne side / both sides, 0.5 mm to 100 mm
Dimple sheet3 mm to 8 mm, as per IRC 83
Density2.1 to 2.2 g/cm³
Working temperature-200°C to +260°C
SizesStandard and non-standard, cut to size

PTFE Sheets for industries in Poland

Poland has a large refinery at Płock, fertiliser and chemical plants in Puławy, mining and steel in Silesia, car and appliance plants, and shipyards in Gdańsk.

  • Oil, gas and petrochemicals: We supply gaskets, slide plates under pipe racks and corrosion-proof linings to plants in Płock.
  • Fertilisers: Customers in Puławy rely on us for acid-resistant gaskets and linings in urea, ammonia and sulphuric acid plants.
  • Mining and minerals: We supply wear pads and chute linings that do not let ore stick to plants in Silesia.
  • Steel and metal processing: Customers in Katowice rely on us for high-temperature pads and gaskets in pickling and coating lines.
  • Automotive and auto components: We supply slide pads, thrust washers and shims in fixtures and assembly lines to plants in Poland.
  • Ports, shipbuilding and marine: We supply seawater-resistant gaskets and slide pads for cranes and ship structures to plants in Gdańsk.

applications of PTFE Sheets

  • Gaskets and seals: Ready-cut and fabricated gaskets for chemical pipelines, flanges, reactors and pumps.
  • Tank and duct linings: Etched sheets bonded inside tanks, chutes and ducts that handle acids and solvents.
  • Sliding and wear pads: Slide pads, shims, wear strips and machine slideway linings where low friction matters.
  • Electrical insulation: Skived sheets as insulation layers in transformers, switchgear and cable wrapping.
  • Bridge and structural bearings: Dimpled and plain sheets for POT-PTFE bearings, sliding plates and expansion joints.
  • Food and pharma equipment: Virgin, non-toxic sheets for gaskets, liners and release surfaces in contact parts.

why buyers in Poland choose National Fluoromers

  • Own manufacturing since 2007: Moulding, sintering and CNC machining happen at our plant in MIDC Miraj, so you buy direct from the maker, not a trader.
  • Virgin and filled grades: Virgin PTFE plus glass, carbon, graphite, bronze and MoS₂ filled grades for the same product.
  • Custom sizes: Standard and non-standard sizes, cut-to-size pieces and machined parts made to your drawing.
  • Export-ready: We pack for sea and air freight, prepare the shipping documents and quote FOB or CIF as you prefer.
  • Quality checks: Every batch is checked for dimensions, density and surface finish before dispatch.

FAQs: PTFE Sheets in Poland

Yes. We manufacture PTFE sheets at our plant in MIDC Miraj, Maharashtra and supply them to customers in Poland. We export to Poland by sea freight from Nhava Sheva (JNPT) and by air cargo for urgent orders, with export packing and shipping documents.
Moulded sheets are made up to 100 mm thick and 1200 × 1200 mm. Skived sheets run from 0.1 mm to 3 mm thick and up to 1200 mm wide. Etched sheets are available from 0.5 mm to 100 mm. We also cut sheets to your exact size.
Use moulded sheets for thick gaskets, pads and machined parts. Use skived sheets for thin insulation, diaphragms and linings. Use chemically etched sheets when the PTFE must be bonded to metal or rubber. Use dimpled sheets for bridge bearings. Our team can recommend a grade if you share the medium, temperature and load.
Yes. Apart from virgin PTFE we make sheets in glass, carbon, graphite, bronze and MoS₂ filled grades for better wear resistance and load capacity.
Send the type of sheet, grade, thickness, size and quantity through our enquiry form, call +91-7620544880 or email sales@nationalptfe.net. We reply with price and delivery time.
Send the product, grade, sizes, quantity and your delivery port or city in Poland. We quote FOB Nhava Sheva or CIF to your port and share the expected transit time.
Need PTFE Sheets in Poland? Send your size and grade for a quick quote.

Call +91-7620544880 or email sales@nationalptfe.net

Send Enquiry
whatsapp