PTFE Bushes & Tubes Manufacturer in Ankleshwar

PTFE Bushes & Tubes Manufacturer, Supplier & Exporter in Ankleshwar, Gujarat

National Fluoromers manufactures PTFE Bushes, PTFE Tubes and PTFE Bushings for OEMs, pump and valve makers and maintenance teams in Ankleshwar, Gujarat. We mould hollow bushes and cylinders, then machine them to size on CNC lathes.

Plants around Ankleshwar GIDC, Panoli GIDC, Jhagadia, Sajod and Bharuch use our bushes as dry-running bearings, liners and sleeves. We dispatch to Ankleshwar from our Miraj plant through road transport and courier partners.

  • Pan-Indiaroad and courier dispatch
  • Directfrom the manufacturer
  • Since 2007PTFE manufacturing

PTFE Bushes & Tubes range we supply in Ankleshwar

Moulded hollow bushes up to 1000 mm diameter, in virgin and all filled grades, held to ±0.1 mm or as per drawing.

CNC-turned bushes up to 300 mm long with tolerances down to ±0.1 mm, made from your drawing or sample.

Moulded envelope bushes 25 mm to 300 mm long, used as corrosion-proof sleeves and liners.

Bushes in glass, carbon, bronze or polymer filled PTFE, with higher compressive strength than virgin PTFE.

Thick-wall PTFE tubes and sleeves for linings, insulation and chemical transfer.

Bronze filled bushings (up to 40 to 60% bronze) for high loads and better heat dissipation in hydraulics.

technical specifications

PropertyValue
MaterialVirgin PTFE / glass, carbon, bronze filled
Moulded bush diameterUp to 1000 mm
Machined bush lengthUp to 300 mm (or custom)
Envelope bush length25 mm to 300 mm
ToleranceDown to ±0.1 mm
MachiningCNC turning, milling, drilling
Working temperature-200°C to +260°C
RangeStandard and non-standard, to drawing

PTFE Bushes & Tubes for industries in Ankleshwar

Ankleshwar GIDC is one of Asia's largest chemical estates, with thousands of units making dyes, pesticides, intermediates and APIs, plus nearby Panoli and Jhagadia.

  • Chemicals and specialty chemicals: We supply pump sleeves and valve bushes that resist acids and solvents to plants in Ankleshwar GIDC.
  • Pharma and biotech: Customers in Ankleshwar and Panoli rely on us for clean bushes on mixers, fillers and packing machines.
  • Oil, gas and petrochemicals: Customers in the Ankleshwar oil field rely on us for valve stem bushes and pump sleeves.
  • Water and effluent treatment: Buyers in Ankleshwar GIDC source bushes in dosing pumps and valves from us.

applications of PTFE Bushes & Tubes

  • Dry-running bearings: Self-lubricating bushes where oil or grease is not allowed.
  • Pump and valve sleeves: Shaft sleeves and stem bushes in chemical pumps and valves.
  • Hydraulic equipment: Guide bushes and bearings in cylinders and presses.
  • Linings: Tube liners for pipes, nozzles and fittings in corrosive service.
  • Electrical insulation: Insulating sleeves and spacers.
  • Food and pharma machines: Clean, non-stick bushes on conveyors, mixers and fillers.

why buyers in Ankleshwar choose National Fluoromers

  • Own manufacturing since 2007: Moulding, sintering and CNC machining happen at our plant in MIDC Miraj, so you buy direct from the maker, not a trader.
  • Virgin and filled grades: Virgin PTFE plus glass, carbon, graphite, bronze and MoS₂ filled grades for the same product.
  • Custom sizes: Standard and non-standard sizes, cut-to-size pieces and machined parts made to your drawing.
  • Reliable supply to Ankleshwar: We pack sheets flat and rods, bushes and parts in cartons so they arrive undamaged, and keep you updated on dispatch.
  • Quality checks: Every batch is checked for dimensions, density and surface finish before dispatch.

FAQs: PTFE Bushes & Tubes in Ankleshwar

Yes. We make PTFE bushes, tubes and bushings at MIDC Miraj and supply customers in Ankleshwar, Gujarat. We dispatch to Ankleshwar from our Miraj plant through road transport and courier partners.
Yes. We CNC machine bushes to your drawing or sample, with tolerances down to ±0.1 mm and lengths up to 300 mm or more on request.
Moulded bushes and cylinders can be made up to 1000 mm diameter.
Bronze filled or carbon filled PTFE usually works best. These grades resist creep and wear much better than virgin PTFE while keeping friction low.
Share the drawing or OD, ID, length, grade and quantity through our enquiry form or call +91-7620544880.
Yes. Our plant is at Plot No. C-54/1/B, MIDC Miraj, Sangli, Maharashtra. Please call +91-7620544880 to fix a visit.
Need PTFE Bushes & Tubes in Ankleshwar? Send your size and grade for a quick quote.

Call +91-7620544880 or email sales@nationalptfe.net

Send Enquiry
whatsapp