PTFE Bushes & Tubes Exporter in Dubai

PTFE Bushes & Tubes Manufacturer, Supplier & Exporter for Dubai, UAE

National Fluoromers manufactures PTFE Bushes, PTFE Tubes and PTFE Bushings for OEMs, pump and valve makers and maintenance teams in Dubai, UAE. We mould hollow bushes and cylinders, then machine them to size on CNC lathes.

Plants around Jebel Ali Free Zone, Dubai Industrial City, Al Quoz, Dubai Investments Park and Dubai Maritime City use our bushes as dry-running bearings, liners and sleeves. We export to Dubai by sea freight from Nhava Sheva (JNPT) and by air cargo for urgent orders, with export packing and shipping documents.

  • Exportsea and air freight
  • FOB / CIFquotes on request
  • Since 2007PTFE manufacturing

PTFE Bushes & Tubes range we supply in Dubai

Moulded hollow bushes up to 1000 mm diameter, in virgin and all filled grades, held to ±0.1 mm or as per drawing.

CNC-turned bushes up to 300 mm long with tolerances down to ±0.1 mm, made from your drawing or sample.

Moulded envelope bushes 25 mm to 300 mm long, used as corrosion-proof sleeves and liners.

Bushes in glass, carbon, bronze or polymer filled PTFE, with higher compressive strength than virgin PTFE.

Thick-wall PTFE tubes and sleeves for linings, insulation and chemical transfer.

Bronze filled bushings (up to 40 to 60% bronze) for high loads and better heat dissipation in hydraulics.

technical specifications

PropertyValue
MaterialVirgin PTFE / glass, carbon, bronze filled
Moulded bush diameterUp to 1000 mm
Machined bush lengthUp to 300 mm (or custom)
Envelope bush length25 mm to 300 mm
ToleranceDown to ±0.1 mm
MachiningCNC turning, milling, drilling
Working temperature-200°C to +260°C
RangeStandard and non-standard, to drawing

PTFE Bushes & Tubes for industries in Dubai

Dubai is the Gulf's trading and re-export hub. Its stockists, EPC contractors and maintenance firms in JAFZA, Dubai Industrial City and Al Quoz supply PTFE parts across the region.

  • Ports, shipbuilding and marine: Customers in Jebel Ali port and Dubai drydocks rely on us for seawater-resistant bushes on deck machinery.
  • Oil, gas and petrochemicals: Customers in Dubai rely on us for valve stem bushes and pump sleeves.
  • Water and effluent treatment: Buyers in Dubai source bushes in dosing pumps and valves from us.
  • Bridges and infrastructure: Customers in Dubai rely on us for guide bushes in bearings and gates.
  • Food, dairy and beverages: Buyers in Dubai Industrial City source non-stick bushes that need no lubrication near food from us.
  • Electrical and electronics: Buyers in Al Quoz source insulating sleeves and spacers from us.

applications of PTFE Bushes & Tubes

  • Dry-running bearings: Self-lubricating bushes where oil or grease is not allowed.
  • Pump and valve sleeves: Shaft sleeves and stem bushes in chemical pumps and valves.
  • Hydraulic equipment: Guide bushes and bearings in cylinders and presses.
  • Linings: Tube liners for pipes, nozzles and fittings in corrosive service.
  • Electrical insulation: Insulating sleeves and spacers.
  • Food and pharma machines: Clean, non-stick bushes on conveyors, mixers and fillers.

why buyers in Dubai choose National Fluoromers

  • Own manufacturing since 2007: Moulding, sintering and CNC machining happen at our plant in MIDC Miraj, so you buy direct from the maker, not a trader.
  • Virgin and filled grades: Virgin PTFE plus glass, carbon, graphite, bronze and MoS₂ filled grades for the same product.
  • Custom sizes: Standard and non-standard sizes, cut-to-size pieces and machined parts made to your drawing.
  • Export-ready: We pack for sea and air freight, prepare the shipping documents and quote FOB or CIF as you prefer.
  • Quality checks: Every batch is checked for dimensions, density and surface finish before dispatch.

FAQs: PTFE Bushes & Tubes in Dubai

Yes. We make PTFE bushes, tubes and bushings at MIDC Miraj and supply customers in Dubai, UAE. We export to Dubai by sea freight from Nhava Sheva (JNPT) and by air cargo for urgent orders, with export packing and shipping documents.
Yes. We CNC machine bushes to your drawing or sample, with tolerances down to ±0.1 mm and lengths up to 300 mm or more on request.
Moulded bushes and cylinders can be made up to 1000 mm diameter.
Bronze filled or carbon filled PTFE usually works best. These grades resist creep and wear much better than virgin PTFE while keeping friction low.
Share the drawing or OD, ID, length, grade and quantity through our enquiry form or call +91-7620544880.
Send the product, grade, sizes, quantity and your delivery port or city in Dubai. We quote FOB Nhava Sheva or CIF to your port and share the expected transit time.
Need PTFE Bushes & Tubes in Dubai? Send your size and grade for a quick quote.

Call +91-7620544880 or email sales@nationalptfe.net

Send Enquiry
whatsapp