PTFE Bushes & Tubes Manufacturer, Supplier & Exporter for Australia
National Fluoromers manufactures PTFE Bushes, PTFE Tubes and PTFE Bushings for OEMs, pump and valve makers and maintenance teams in Australia. We mould hollow bushes and cylinders, then machine them to size on CNC lathes.
Plants around Perth, Melbourne, Sydney, Brisbane and Gladstone use our bushes as dry-running bearings, liners and sleeves. We export to Australia by sea freight from Nhava Sheva (JNPT) and by air cargo for urgent orders, with export packing and shipping documents.
- Exportsea and air freight
- FOB / CIFquotes on request
- Since 2007PTFE manufacturing
PTFE Bushes & Tubes range we supply in Australia
Moulded hollow bushes up to 1000 mm diameter, in virgin and all filled grades, held to ±0.1 mm or as per drawing.
CNC-turned bushes up to 300 mm long with tolerances down to ±0.1 mm, made from your drawing or sample.
Moulded envelope bushes 25 mm to 300 mm long, used as corrosion-proof sleeves and liners.
Bushes in glass, carbon, bronze or polymer filled PTFE, with higher compressive strength than virgin PTFE.
Thick-wall PTFE tubes and sleeves for linings, insulation and chemical transfer.
Bronze filled bushings (up to 40 to 60% bronze) for high loads and better heat dissipation in hydraulics.
technical specifications
| Property | Value |
|---|---|
| Material | Virgin PTFE / glass, carbon, bronze filled |
| Moulded bush diameter | Up to 1000 mm |
| Machined bush length | Up to 300 mm (or custom) |
| Envelope bush length | 25 mm to 300 mm |
| Tolerance | Down to ±0.1 mm |
| Machining | CNC turning, milling, drilling |
| Working temperature | -200°C to +260°C |
| Range | Standard and non-standard, to drawing |
PTFE Bushes & Tubes for industries in Australia
Australia has major mining in Western Australia and Queensland, LNG plants in Gladstone and the north-west, chemical and food processing, and water infrastructure.
- Mining and minerals: We supply bushes in dusty equipment where grease attracts dirt to plants in Western Australia and Queensland.
- Oil, gas and petrochemicals: We supply valve stem bushes and pump sleeves to plants in Gladstone and the north-west.
- Chemicals and specialty chemicals: Buyers in Australia source pump sleeves and valve bushes that resist acids and solvents from us.
- Food, dairy and beverages: Customers in Australia rely on us for non-stick bushes that need no lubrication near food.
- Water and effluent treatment: Customers in Australia rely on us for bushes in dosing pumps and valves.
- Bridges and infrastructure: We supply guide bushes in bearings and gates to plants in Australia.
applications of PTFE Bushes & Tubes
- Dry-running bearings: Self-lubricating bushes where oil or grease is not allowed.
- Pump and valve sleeves: Shaft sleeves and stem bushes in chemical pumps and valves.
- Hydraulic equipment: Guide bushes and bearings in cylinders and presses.
- Linings: Tube liners for pipes, nozzles and fittings in corrosive service.
- Electrical insulation: Insulating sleeves and spacers.
- Food and pharma machines: Clean, non-stick bushes on conveyors, mixers and fillers.
why buyers in Australia choose National Fluoromers
- Own manufacturing since 2007: Moulding, sintering and CNC machining happen at our plant in MIDC Miraj, so you buy direct from the maker, not a trader.
- Virgin and filled grades: Virgin PTFE plus glass, carbon, graphite, bronze and MoS₂ filled grades for the same product.
- Custom sizes: Standard and non-standard sizes, cut-to-size pieces and machined parts made to your drawing.
- Export-ready: We pack for sea and air freight, prepare the shipping documents and quote FOB or CIF as you prefer.
- Quality checks: Every batch is checked for dimensions, density and surface finish before dispatch.
FAQs: PTFE Bushes & Tubes in Australia
Call +91-7620544880 or email sales@nationalptfe.net
Send Enquiry
